Table 34: Advanced Setup Menu Sub-Screens And Functions - Kontron COMe-bID7 User Manual

Table 34: Advanced Setup menu Sub-screens and Functions

Sub-Screen Second Level
Sub-screen
Trusted Security device
Computing Support
Active PCR
Banks
Available PCR
Banks
SHA-1 PCR Bank
SHA256 PCR
Bank
Pending
Operation
Platform
Hierarchy
Storage
Hierarchy
Endorsement
Hierarchy
TPM2.0 UEFI
Spec Version
Physical
Presence Spec
Version
TPM 20
InterfaceType
Device Select
ACPI Settings Enable ACPI
Auto
Configuration
Miscellaneous
Generic eSPI
Decode Ranges
Watchdog
www.kontron.com
Further Sub-Screens/Description
Enables or disables BIOS support for security device. Operating
System will not show security device. The TCG EFI protocol and
INT1A interface are not available.
[Enabled, Disabled]
[SHA-1]
[SHA-1, SHA256]
[Enable/Disable]
[Enable/Disable]
Schedules an operation for Security Device
Note: Computer reboots on restart in order to change the state
of the security device.
[None, TPM Clear]
[Enabled, Disabled]
[Enabled, Disabled]
[Enabled, Disabled]
Selects TCG2 Spec Version support:
TCG_1_2 -compatible mode for Win8/Win10 and
TCG_2: supports TCG2 protocol and event format for Win10 or
later. [TCG_1_2, TCG_2]
Select to tell OS to support either PPI Spec 1.2 or 1.3
Note: Some HCK tests might not support 1.3.
[1.2, 1.3]
Read only field
[TIS]
BIOS support for security devices. Auto supports both TPM 1.2
and TPM 2.0. TPM 1.2 supports TPM 1.2 devices only and TPM
2.0 supports TPM 2.0. devices only.
[TPM 1.2, TPM 2.0, Auto]
Enables or disables ACPI auto configuration. If enabled, the
system uses generic ACPI settings that may not fit the system
best.
[Enabled, Disabled]
Generic LPC via Enables or disables the generic LPC via aSPI
eSPI decode range
[Enabled, Disabled]
Auto Reload Enables automatic reload of watchdog timers
on timeout
[Enabled, Disabled]
COMe-bID7 User Guide Rev. 1.2
// 72