Kontron COMe-bID7 User Manual page 74

Sub-Screen Second Level
Sub-screen
CPU Fan –
Fan Trip Point
CPU Fan –
Trip Point Speed
CPU Fan – Ref.
Temperature
External Fan-
Fan Control
External Fan–
Fan Pulse
External Fan-
Fan Trip point
External Fan-
Trip Point Speed
Fan Reference
Temperature
5.0 V Standby
Batt Volt. at
COMe Pin
Widerange Vcc
UEFI Variables Password
Protection protection of
Runtime
Variables
Serial Port COM1 Console
Console Redirection
Redirection Settings
COM1 Console
Redirection
settings
www.kontron.com
Further Sub-Screens/Description
Displays temperature at which the fan accelerates. (Range:
20°C – 80°)
[50]
Displays Fan speed at trip point in %. Minimum value is 30 %.
Fan always runs at 100 % at TJmax (-10°C).
[50]
Determines temperature source used for automatic fan control
[PCH Temperature, Module Temperature, CPU Temperature]
Set fan control mode.
'Disable' will totally stop the fan.
a. Disable - stops fan.
b. Manual – manually sets the fan.
c. Auto – Hardware monitor controls cooling, similar to
ACPI based 'Active Cooling', without producing a
software load to the system.
[Disable, Manual, Auto]
Displays number of pulse fan produces during 1 revolution
(Range: 1-4)
[2]
Displays temperature at which fan accelerates. (Range: 20°C to
80°C)
[50]
Displays Fan speed at trip point in %. Minimum value is 30%
Fan always runs at 100% at TJmax (-10°C)
[50]
Determines temperature source used for automatic fan control
[PCH Temperature, Module Temperature, CPU Temperature]
Read only field
Displays standby voltage
Read only field
Displays battery voltage at COMe pin
Read only field
Displays wide range VCC
[Enabled, Disabled]
Console redirection via COMe module's COM1.
If redirection is enabled then the port settings such as Terminal
type, Bits per second, Data bits, Parity etc. can be adjusted here.
Note: On-module COM ports do not support flow control.
[Enabled, Disabled]
The settings specify how the host computer and the remote
computer (which the user is using) will exchange data. Both
computers should have the same or compatible settings.
COMe-bID7 User Guide Rev. 1.2
// 74