Kontron COMe-bID7 User Manual page 82

Sub-Screen Second Level
Sub-screen
XHCI Hand-off
USB Mass
Storage Driver
Support
USB Transfer
Time-out
Device Reset
Time-out
Device Power-
up Delay
Mass Storage
Devices
Network Stack Network Stack
Configuration
[NVME Device]
NVMe
Configuration
SDIO SDIO Access
Configuration Mode
Tls Auth Server CA
Configuration Configuration
Client CA
Configuration
All CPU Read only fields
Information
Emulation uBIOS
Configuration Generation
Hybrid SLE
Mode
MSR Trace for
PM
RAM Disk Create raw
Configuration
Create from file
Remove
selected RAM
disk(s)
www.kontron.com
Further Sub-Screens/Description
[Enabled, Disabled, Auto]
XHCI ownership change should be claimed by XHCI driver. Note:
this is a work around for OS(s) without XHCI hand-off support.
[Enabled, Disabled]
Enables or disables USB mass storage driver support
[Enabled, Disabled]
Displays timeout value for control, bulk and interrupt transfers
[1 sec, 5 sec, 10 sec, 20 sec]
Displays USB mass storage device start unit command time-
out
[10 sec, 20 sec, 30 sec, 40 sec]
Maximum time the device will take before it properly reports
itself to the Host Controller.
'Auto' uses default value: for a Root port it is 100 ms, for a Hub
port the delay is taken from Hub descriptor.
[Auto, Manual]
[Auto, Floppy, Forced FDD, Hard Disk, CD-ROM]
Enables or disables the UEFI network stack.
[Enabled, Disabled]
[Auto, ADMA, SDMA, PIO]
Enroll Cert, Delete Cert
Enroll Cert, Delete Cert
[Enabled, Disabled, Auto]
[Enabled, Disabled, Auto]
[Enabled, Disabled, Auto]
COMe-bID7 User Guide Rev. 1.2
// 82