Table of Contents
Advertisement
iC9200 Series
Remove connector
2.5.2 Wiring System SLIO periphery
2.5.2.1
Wiring power module
Terminal module terminals
Data
HB700 | CPU | PMC921xEx | en | 23-06
You have the option to remove the connector of the power supply, e.g. for a module
change with fixed wiring. For this the connector has a locking lever. The connector is
removed as follows:
1.
Remove connector:
By pressing the release button as shown, the connector is released and can be
removed.
2.
Plug connector:
The connector is plugged by plugging it directly into the release lever. Here, the
locking levers return to their original position.
When using System SLIO modules, you must always mount the power
module 007-1AB00 - DC 24V 10A, because the CPU does not provide a
power section supply due to the system.
With the power module, terminals with spring clamp technology are used for wiring. The
spring clamp technology allows quick and easy connection of your supply lines. In con-
trast to screw terminal connections this type of connection is vibration proof.
U
30V DC
max
I
10A
max
Cross section
0.08 ... 1.5mm
Stripping length 10mm
Wiring > Wiring System SLIO periphery
2
(AWG 28 ... 16)
Basics and mounting
21
Advertisement
Table of Contents
