Table of Contents
Advertisement
Deployment
Web-based management - WBM > Security
Accessing the firewall
[Apply] and [Discard]
'System Message'
'System Status'
'General Configuration'
96
1.
Log in to the WBM as an administrator.
2.
Navigate to 'Security è Firewall'.
ð The configuration page for the firewall is opened.
Security
iC92...
PMC92...
Firewall
Information
Diagnostics
Configuration
Security
Certificate Authentication
Firewall
SD Card
Syslog Configuration
User Authentication
Administration
The changed firewall settings are transferred to the CPU with the [Apply] button.
n
n
With the [Discard] button the settings made are discarded after a security query and
the WBM page is reloaded.
Messages regarding the transfer of firewall settings to the CPU are shown at 'System
Message' . The following system messages can occur:
n
Status = OK
–
The configured firewall settings were successfully transferred to the CPU.
n
Warning
–
The CPU reports a warning, e.g. if one or more additional filter configurations in
the system exist. The warning contains the names of all additionally loaded filter
tables.
n
Error
–
At least one firewall configuration is incorrect.
When the firewall is enabled, you can use the [Show Rules] button to show an over-
n
view of all enabled firewall rules as a txt file.
n
With [Save to File] you can save the file locally on your PC as a txt file.
At 'General Configuration' you can see the current firewall status and set it temporarily or
permanently.
HB700 | CPU | PMC921xEx | en | 23-06
iC9200 Series
Advertisement
Table of Contents
