Table of Contents
Advertisement
Deployment
Commissioning > Online access to the CPU
4.4.3 Create a new project
Proceeding
4.4.4 Online access to the CPU
IP address parameters for
communication
64
1.
Start iCube Engineer.
2.
On the start bar, click on a project template that corresponds to your firmware ver-
sion, such as Yaskawa CPU iC921xM-x
ð The project template for a blank CPU iC921xM-x opens.
3.
Open 'File è Save Project As', assign a meaningful name to your project and close
the dialog with [Save].
On delivery the following IP address parameters for the communication are preset in the
project template of the CPU:
n
Ethernet-Port (X3/X4): 192.168.1.1
n
Subnet mask: 255.255.255.0
n
Gateway: -
If your CPU has different IP address parameters, you can adapt them for iCube Engineer
via the following procedure:
1.
In the 'Plant' area, double-click the CPU node
ð The CPU editor group opens.
2.
Select the 'Settings' editor.
HB700 | CPU | PMC921xEx | en | 23-06
iC9200 Series
Advertisement
Table of Contents
