iC9200 Series
1.3 Safety instructions
Intended use
Documentation
Disposal
HB700 | CPU | PMC921xEx | en | 23-06
WARNING!
Danger by non intended use!
Any other use beyond the intended use and/or other use of this product
can lead to dangerous situations and is prohibited.
The CPU iC921xM-x is constructed and produced for:
n
industrial use.
general control and automation tasks.
n
n
industrial network communication, machine and process control.
n
the connection to EtherCAT and PROFINET (optional).
n
the installation in a control cabinet with degree of protection IP54 or better.
n
operation within the environmental conditions specified in the technical data.
DANGER!
This device is not certified for applications:
–
in explosive environments (EX-zone)
The manual must be available for:
n
Project design department
n
Installation department
n
Commissioning
n
Operation
CAUTION!
The following conditions must be met before using or commis-
sioning the components described in this manual:
–
Changes to the automation system may only be made when the
power supply is disconnected!
–
Installation and hardware modifications only by properly trained per-
sonnel.
–
The national rules and regulations of the respective country must be
satisfied (installation, safety, EMC ...)
National rules and regulations apply to the disposal of the device!
General
Safety instructions
7