Table of Contents
Advertisement
Deployment
Web-based management - WBM > Configuration
Enable/disable system
services
4.9.4.4
Web Services
4.9.4.4.1
NGINX Web server
Selected HTTPS certificate
88
–
Before disabling a service that is enabled by default, make sure that it
is also not required for the entire system.
–
Please also note that changing a setting always overwrites the entire
system services settings.
–
When PROFINET (optional) is disabled, the DCP protocol, which is
used for identification and IP address assignment for participants in
the PROFINET network, is also disabled.
Configuration
iC92...
PMC92...
System Services
Information
Diagnostics
Configuration
Network
Date and Time
System Services
Web Services
Security
Administration
1.
By selecting or deselecting the corresponding check box, you enable respectively
disable a system service in the list.
2.
Use the [Apply and Reboot] button to apply the settings for the system services.
ð After a security query, the settings for the system services are adopted and the
CPU is restarted.
The page provides access to the configuration of web services, e.g. HTTPS certificate,
which is used for the NGINX web server.
The HTTPS certificate and the associated private key are located as files
in the file system of the CPU and are listed as symbolic links on the web
page. During a firmware update, the existing certificate and key files are
moved to a backup directory and symbolic links are created that refer to
this backup.
The HTTPS certificate is used to authenticate the CPU to the web server.
HB700 | CPU | PMC921xEx | en | 23-06
iC9200 Series
Advertisement
Table of Contents
