Table of Contents
Advertisement
iC9200 Series
4.5 Memory management
4.5.1 Internal memory
Overview
HB700 | CPU | PMC921xEx | en | 23-06
2.
Enter your login details and click on [Login].
On delivery, the following access data are preset with administrator
rights:
–
Username: admin
–
The password is printed under the front flap on the front of the
CPU.
ð You now have access to the WBM of the CPU with the access rights assigned
to you.
3.
Navigate to Network in the Configuration area.
ð Here you can change the current IP address parameters in the 'Configuration'
column.
Configuration
iC92...
PMC92...
Network
Übersicht
Information
Diagnostics
Configuration
Network
Date and Time
System Services
Web Services
Security
Administration
4.
Enter your new IP address parameters in the 'Configuration' column.
CAUTION!
When assigning the IP address parameters, please note that the
number ranges of the IP addresses of X1/X2 and X3/X4 must not
overlap if they exist!
5.
Click on [Apply and Reboot].
ð The settings are accepted, transferred to the CPU and the CPU is automatically
restarted for activation.
The CPU can now only be reached via the new IP address
parameters. Please note that these new data are currently not
automatically transferred in the settings of iCube Engineer. You
have to manually adjust these in the settings there.
Please note that, depending on the firmware and the components used,
not the entire memory area is available.
Memory management > Internal memory
...
Deployment
67
Advertisement
Table of Contents
