Table of Contents
Advertisement
iC9200 Series
Disable SD card deploy-
ment
4.9.5.4
Syslog Configuration
HB700 | CPU | PMC921xEx | en | 23-06
3.
Restart the CPU.
n
The deployment of the Yaskawa SD card is enabled.
ð
n
If a new Yaskawa SD card is detected during the initialization phase, the
overlay file system with user program, configurations, user data and firm-
ware adjustments, is moved from the internal parametrization memory to
the Yaskawa SD card and deleted in the internal parametrization memory.
n
The CPU uses the overlay file system on the Yaskawa SD card, now.
n
At 'Status' 'External SD card' is shown.
Please note when using without an Yaskawa SD card!
–
–
–
–
1.
Disable the 'Support External SD card' parameter.
2.
Click on [Apply].
ð The setting is saved and only applied when you restart the CPU.
3.
Restart the CPU.
n
The deployment of the Yaskawa SD card is disabled.
ð
n
The Yaskawa SD card is not recognized by the CPU during the initialization
phase and the overlay file system of the internal parametrization memory is
enabled.
n
The CPU uses exclusively the internal parametrization memory, now.
At 'Status' 'Internal SD card' is shown.
n
Here you can configure Syslog servers. Syslog respectively Syslog-ng is a standard for
transmitting log messages in a network.
By default, support for the Yaskawa SD card is enabled.
Disable the support of the Yaskawa SD card if you want to
operate the CPU without YaskawaSD card.
If the support of the Yaskawa SD card remains enabled and
the CPU is operated without a Yaskawa SD card, there is a
risk of data theft or data manipulation.
–
Unauthorized persons may insert a Yaskawa SD card
and restart the CPU.
–
If a new, unused Yaskawa SD card is detected after
PowerON, the overlay file system with user program,
configurations, user data and firmware adjustments, is
moved from the internal parametrization memory to the
Yaskawa SD card and deleted in the internal parametri-
zation memory. Projects and IP configurations saved
there are then no longer available!
When changing to operation without Yaskawa SD card, the
overlay file system of the internal parametrization memory is
activated by the CPU after PowerON and is used now.
Please note that no data are used from the Yaskawa SD
card. There is also no function for transferring back from the
Yaskawa SD card to the internal parametrization memory.
Web-based management - WBM > Security
Deployment
101
Advertisement
Table of Contents
