Table of Contents
Advertisement
iC9200 Series
Demounting on
System SLIO
HB700 | CPU | PMC921xEx | en | 23-06
5.
Turn the locking lever of the CPU to be mounted upwards, place the CPU at the
mounting rail and turn the lever downward.
6.
Reconnect the connector of the power supply.
7.
Now you can bring your system back into operation.
1.
Power-off your system.
2.
Remove the connector of the power supply of the CPU. By pressing the release
button as shown, the connector is released and can be removed.
3.
For mounting reasons you have to remove the electronic module of the power
module located right beside the CPU. Press the unlocking lever at the lower side of
the power module and pull it forward.
4.
Turn all the locking lever of the CPU to be exchanged upwards.
5.
Pull the CPU forward.
6.
For mounting turn all the locking lever of the CPU to be mounted upwards.
Basics and mounting
Demounting > Demounting CPU
29
Advertisement
Table of Contents
