Table of Contents
Advertisement
iC9200 Series
Connecting to the CPU
HB700 | CPU | PMC921xEx | en | 23-06
3.
Select the 'Ethernet' view.
4.
At 'LAN (X3/X4) (PROFINET)' the IP address parameters for the connection via
n
the Ethernet-Port (X3/X4) can be set.
ð When establishing an Ethernet connection to the CPU, the IP address parame-
ters specified here are used by iCube Engineer for the corresponding interface.
Please note that the online search is currently only supported by port
X3/X4!
Connect port X3 or X4 to the Ethernet interface of your PC. Please note that for commu-
nication via iCube Engineer the network card of the PC and the Ethernet interface of the
CPU are in the same IP circle. If necessary, contact your network administrator.
1.
In the editor group of the CPU, select the editor 'Cockpit' .
2.
Set the interface 'LAN (X3/X4)' and click on
LAN (X3/X4)
ð A connection between iCube Engineer and your CPU is established, by means
of the IP address parameters, and the login dialog for authentication is opened.
Commissioning > Online access to the CPU
.
Deployment
65
Advertisement
Table of Contents
