iC9200 Series
Configuration
HB700 | CPU | PMC921xEx | en | 23-06
Temporary enabling
1.
Select at 'Status' the entry 'Start' or 'Restart' .
2.
Click on [Apply].
ð The firewall is enabled. After restarting the CPU, the firewall is disabled again.
Temporary disabling
1.
Select at 'Status' the entry 'Stop' .
2.
Click on [Apply].
ð The firewall is disabled. After restarting the CPU, the firewall is enabled again.
Permanent enabling
1.
Activate the 'Activation' selection field.
2.
Click on [Apply].
ð The firewall is enabled and remains enabled even after a restart.
Permanent disabling
1.
Disable the 'Activation' selection field.
2.
Click on [Apply].
ð The firewall is disabled and remains disabled even after a restart.
By disabling the firewall you endanger the security of your
system, especially if it can be reached via the Internet! The fire-
wall should only temporarily be disabled for testing purposes
such as troubleshooting.
The configuration of the firewall rules is divided into the following tabs:
n
Basic Configuration
–
Here you will find predefined firewall rules which you can enable or disable.
n
User Configuration
–
Here you can create, enable or disable your own firewall rules according to
defined specifications.
There is a 'Action' column in both tabs. The firewall settings are applied with the [Apply]
button. There are the following setting options for the 'Action' column:
Accept
n
–
The corresponding connection and connection request is accepted.
–
The corresponding connection can be established.
n
Drop
–
The corresponding connection is interrupted.
–
There is no answer to the corresponding request.
–
The corresponding package is discarded.
Web-based management - WBM > Security
Deployment
97