Table of Contents
Advertisement
Deployment
Web-based management - WBM > Security
Enable/disable User
Authentication
Changing System Use
Notification
User management
Adding a user
104
–
By default user authentication is enabled. On delivery, the "Admin"
user is already created with administrator rights.
–
Please note that by disabling the user authentication you endanger
the security of your system against unauthorized access!
–
Use the administrator password printed on the CPU only for the initial
login to the WBM.
–
After you have successfully logged in, you should change the admin-
istrator password for security reasons.
Security
iC92...
PMC92...
User Authentication
Information
Diagnostics
Configuration
Security
Certificate Authentication
Firewall
SD Card
Syslog Configuration
User Authentication
Administration
1.
Click the [Enable/Disable] button next to User Authentication.
ð The user authentication dialog is opened.
2.
Here you can enable respectively disable the user authentication by selecting or
deselecting the checkbox.
3.
With [Save] the changes are applied and the dialog is closed.
Every time you log on to the CPU via WBM or iCube Engineer, System Use Notification is
shown. You can edit this text for customization. The displayed information is independent
of the language used for the user interface. You should therefore take into account all
required languages when editing.
1.
To edit, click [Edit Notification] next to System Use Notification.
ð The dialog window for editing the text is opened.
2.
Adjust your text accordingly.
3.
With [Save] the changes are applied and the dialog is closed.
User authentication is used to manage the access data of all users who are authorized to
access the CPU and to assign the required access authorizations to each user. The user
data of the newly created users are stored internally in the CPU.
1.
Click the [Add User] button.
ð The dialog window for creating a new user is opened.
HB700 | CPU | PMC921xEx | en | 23-06
iC9200 Series
Advertisement
Table of Contents
