Mitsubishi Electric 800 Series Instruction Manual page 613

8
SPECIFICATIONS
This chapter explains the SPECIFICATIONS of this product.
Always read the instructions before using the equipment.
For the "SPECIFICATIONS" of the separated converter type, refer to the FR-F862 (Separated Converter Type) Instruction
Manual (Hardware).
8.1
Inverter rating
Model FR-F860-[ ]
Inverter capacity (kW)
Applicable SLD
motor capacity
LD
*1
(kW)
Rated SLD
capacity
LD
*2
(kVA)
Rated SLD
*3
current (A) LD
Overload SLD
current
LD
*4
rating
*5
Rated voltage
Rated input
AC voltage/frequency
Permissible AC voltage
fluctuation
Permissible frequency
fluctuation
Rated input Without
*6 DC
current (A)
reactor
With DC
reactor
Power Without
supply DC
capacity reactor
*7
With DC
(kVA)
reactor
Protective structure (IEC 60529)
Cooling system
Approx. mass (kg)
*1 The applicable motor capacity indicated is the maximum capacity applicable for use of the 4-pole standard motor.
*2 The rated output capacity indicated assumes that the output voltage is 575 V.
*3 When an operation is performed with the carrier frequency set to 3 kHz or more, and the inverter output current reaches the value indicated in
the parenthesis, the carries frequency is automatically lowered. The motor noise becomes louder accordingly.
*4 The % value of the overload current rating indicated is the ratio of the overload current to the inverter's rated output current. For repeated duty,
allow time for the inverter and motor to return to or below the temperatures under 100% load.
*5 The maximum output voltage does not exceed the power supply voltage. The maximum output voltage can be changed within the setting range.
However, the maximum point of the voltage waveform at the inverter output side is the power supply voltage multiplied by about
*6 The rated input current indicates a value at a rated output voltage. The impedance at the power supply side (including those of the input reactor
and cables) affects the rated input current.
*7 The power supply capacity is the value when at the rated output current. It varies by the impedance at the power supply side (including those of
the input reactor and cables).
612
8. SPECIFICATIONS
8.1 Inverter rating
00680 01080
45 75
45 75
45 75
68 108
62 99
68 (57.8) 108 (91.8)
62 (52.7) 99 (84.1)
110% 60 s, 120% 3 s (inverse-time characteristics) at surrounding air temperature 40°C
120% 60 s, 150% 3 s
(inverse-time
characteristics) at
surrounding air
temperature 40°C
Three-phase 525 to 600 V
Three-phase 525 to 600 V 60 Hz
472 to 660 V 60 Hz
±5%
SLD 87.0 ―
LD 79.0 ―
SLD 68.0 108.0
*3 (57.8) (91.8)
LD 62.0 99.0
(52.7) (84.1)
SLD 86.8 ―
LD 79.1 ―
SLD 68.0 108.0
LD 62.0 99.0
Open type (IP00)
Forced air
36 41
01440 01670 02430
90 110 132
110 110 185
90 110 150
144 167 242
131 152 221
144 (122) 167 (141) 243 (206)
131 (122) 152 (129) 221 (187)
120% 60 s, 150% 3 s (inverse-time characteristics) at surrounding air
temperature 50°C
― ― ―
― ― ―
144.0 167.0 243.0
(122.0) (141.0) (206.0)
131.0 152.0 221.0
(122.0) (129.0) (187.0)
― ― ―
― ― ―
144.0 167.0 242.0
131.0 152.0 221.0
52 52 55
02890 03360 04420
160 220 250
220 260 335
185 220 300
288 335 441
254 303 401
289 (245) 336 (285) 442 (375)
255 (216) 304 (258) 402 (341)
― ― ―
― ― ―
289.0 336.0 442.0
(245.0) (285.0) (375.0)
255.0 304.0 402.0
(216.0) (258.0) (341.0)
― ― ―
― ― ―
288.0 335.0 441.0
254.0 303.0 401.0
112 115 153
.