Mitsubishi Electric 800 Series Instruction Manual page 17

1
INTRODUCTION
The contents described in this chapter must be read before using this product.
Always read the instructions before using the equipment.
For the INTRODUCTION of the separated converter type, refer to the FR-F802 (Separated Converter Type) Instruction Manual
(Hardware).
 Abbreviations
DU
Operation panel
Parameter unit
PU
Inverter
Pr.
PU operation
External operation
Combined operation
 Trademarks
• Microsoft and Visual C++ are registered trademarks of Microsoft Corporation in the United States and other countries.
• MODBUS is a registered trademark of SCHNEIDER ELECTRIC USA, INC.
• BACnet is a registered trademark of the ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning
Engineers).
• LONWORKS is a registered trademark of Echelon Corporation in the United States and other countries.
• Other company and product names herein are the trademarks and registered trademarks of their respective owners.
 Notes on descriptions in this Instruction Manual
• Connection diagrams in this Instruction Manual appear with the control logic of the input terminals as sink logic, unless
otherwise specified. (For the control logic, refer to
1.1
Product checking and accessories
Unpack the product and check the rating plate and the capacity plate of the inverter to ensure that the model agrees with the
order and the product is intact.
 Inverter model
• FR-F860-00450 or lower
FR - F8 0
Symbol Voltage class
6 600 V class
00027 to 00450
• FR-F860-00680 or higher
Symbol Structure, functionality
0 Standard model
2 Separated converter type
FR - F8
Symbol Voltage class
00680 to 08500 Inverter SLD rated current (A)
6 600 V class
16
1. INTRODUCTION
1.1 Product checking and accessories
Item
6 - - E3 - N6
00027
Symbol Description
Inverter SLD
rated current (A)
Symbol Type
3
6 0 - 00680 - 3
- 60
Symbol Description
Operation panel (FR-LU08)
Operation panel (FR-LU08)
Parameter unit (FR-PU07)
Operation panel and parameter unit
Mitsubishi Electric inverter FR-F860 series
Parameter number (Number assigned to function)
Operation using the PU (operation panel/parameter unit)
Operation using the control circuit signals
Combined operation using the PU (operation panel/parameter unit)
and External operation
page 54.)
Symbol Type
Symbol
(conforming to IEC 60721-3-3: 1994 3C2/3S2)
E3 CA3
N6
CA3
Circuit board coating
Symbol
(conforming to IEC 60721-3-3: 1994 3C2/3S2)
60
06
Description
Circuit board coating
conductor
With
Plated conductor
With
With
UL Type 1
Plated
certification
Without With
Without
With