Assigning Phantom Buttons As Rooms Or Scenes - Lutron Electronics RadioRA RA-RS232 Setup And Installation Manual

Table of Contents

Advertisement

Programming Preparations

Assigning Phantom Buttons as ROOMS or SCENES

Note: Phantom Buttons 1-15 on an RS232 Interface can be individually programmed as a ROOM or a SCENE.
Note: For a description of a ROOM, SCENE or Phantom Button, see the Definitions of Common Terms on page
7.
Step 1
Begin ROOM/SCENE
assignment
Simultaneously press and hold the Up and
Down buttons until U I (User Programming
Mode 1) appears on the display and the Select
LED turns ON (approximately 3 seconds).
and o erating instructions.
Level Set LED – OFF
For additional assistance call the Lutron Hotline:
RadioRA is a trademark of Lutron Electronics Co. Inc.
This product may be covered by one or more of the following
U.S. patents: 5,248,919; 5,399,940; 5,736,965; 5,798,581;
5,838,226; 5,848,054; 5,905,442, 5,982,103
Up
TX
RX
Down
Select
After 3 seconds, the display will begin
alternately flashing the Phantom Button
Number currently being programmed and U I.
The Assign or Level Set LED will turn ON
indicating whether the current Phantom Button
is a ROOM OR SCENE as shown below.
and o erating instructions.
Level Set LED – OFF
For additional assistance call the Lutron Hotline:
RadioRA is a trademark of Lutron Electronics Co. Inc.
This product may be covered by one or more of the following
U.S. patents: 5,248,919; 5,399,940; 5,736,965; 5,798,581;
5,838,226; 5,848,054; 5,905,442, 5,982,103
Up
TX
RX
Down
Select
By default, all buttons are assigned as
ROOMS.
Changing a button assignment from ROOM to
SCENE (or vice versa) will delete all previous
programming of that button.
12
RadioRA
Setup Guide Addendum for the RS232 Interface
®
(800) 523-9466
Assignment Mode
Level Set Mode
Power
(800) 523-9466
ROOM
Assignment Mode
SCENE
Level Set Mode
Power
Step 2
Select Phantom Button to
program
Press and hold the Up or Down button until
the desired Phantom Button Number is on the
display.
and o erating instructions.
Level Set LED – OFF
(800) 523-9466
For additional assistance call the Lutron Hotline:
RadioRA is a trademark of Lutron Electronics Co. Inc.
This product may be covered by one or more of the following
U.S. patents: 5,248,919; 5,399,940; 5,736,965; 5,798,581;
5,838,226; 5,848,054; 5,905,442, 5,982,103
Up
TX
RX
Down
Select
Level Set Mode
Display will alternately flash the selected
Phantom Button Number and U I.
and o erating instructions.
Level Set LED – OFF
(800) 523-9466
For additional assistance call the Lutron Hotline:
RadioRA is a trademark of Lutron Electronics Co. Inc.
This product may be covered by one or more of the following
U.S. patents: 5,248,919; 5,399,940; 5,736,965; 5,798,581;
5,838,226; 5,848,054; 5,905,442, 5,982,103
Assignment Mode
Up
TX
RX
Down
Select
Level Set Mode
ALL ON (Phantom Button 16) and ALL OFF
(Phantom Button 17) cannot be accessed in
this mode. They are always SCENES.
Assignment Mode
Power
Power

Advertisement

Table of Contents
loading

This manual is also suitable for:

Radiora rb-rs232

Table of Contents