Lutron Electronics RadioRA RA-RS232 Setup And Installation Manual page 37

Advanced Programming
Step 4
Complete copy button
programming
Press and hold the Level Set button until all
LEDs flutter (approximately 3 seconds).
and o erating instructions.
Level Set LED – OFF
(800) 523-9466
For additional assistance call the Lutron Hotline:
RadioRA is a trademark of Lutron Electronics Co. Inc.
This product may be covered by one or more of the following
U.S. patents: 5,248,919; 5,399,940; 5,736,965; 5,798,581;
5,838,226; 5,848,054; 5,905,442, 5,982,103
Up
TX RX
Down Select Level Set Mode
Level Set LED will turn OFF and the display
will stop flashing.
• Repeat Steps 1 through 4 to copy
button programming on any remaining
unprogrammed RS232 Interfaces.
Assignment Mode
Power
RadioRA Setup Guide Addendum for the RS232 Interface
®
37