Table of Contents
Advertisement
Phantom SCENE Button Programming
Assigning Dimmers, Switches or GRAFIK Eye
Units to Phantom SCENE Buttons
Note: A Phantom Button can also be assigned as a ROOM (see page 12).
Step 1
Begin assigning Dimmers,
Switches or GRAFIK Eye
Control Units to Phantom
SCENE Buttons
Press and hold the Assign button until the
Assign LED turns on and the display begins to
flash (approximately 3 seconds).
and o erating instructions.
Level Set LED – OFF
For additional assistance call the Lutron Hotline:
RadioRA is a trademark of Lutron Electronics Co. Inc.
This product may be covered by one or more of the following
U.S. patents: 5,248,919; 5,399,940; 5,736,965; 5,798,581;
5,838,226; 5,848,054; 5,905,442, 5,982,103
Up
TX
RX
Down
Select
Assign LED will turn ON and the display will
flash.
and o erating instructions.
Level Set LED – OFF
For additional assistance call the Lutron Hotline:
RadioRA is a trademark of Lutron Electronics Co. Inc.
This product may be covered by one or more of the following
U.S. patents: 5,248,919; 5,399,940; 5,736,965; 5,798,581;
5,838,226; 5,848,054; 5,905,442, 5,982,103
Up
TX
RX
Down
Select
20
RadioRA
Setup Guide Addendum for the RS232 Interface
®
(800) 523-9466
Assignment Mode
Level Set Mode
Power
(800) 523-9466
Assignment Mode
Level Set Mode
Power
Step 2
Select a Phantom SCENE
Button to program
Press and hold the Up or Down button to
select the Phantom SCENE Button you want to
program.
and o erating instructions.
Level Set LED – OFF
(800) 523-9466
For additional assistance call the Lutron Hotline:
RadioRA is a trademark of Lutron Electronics Co. Inc.
This product may be covered by one or more of the following
U.S. patents: 5,248,919; 5,399,940; 5,736,965; 5,798,581;
5,838,226; 5,848,054; 5,905,442, 5,982,103
Up
TX
RX
Down
Select
Level Set Mode
Selected Phantom SCENE Button Number will
flash on the display.
and o erating instructions.
Level Set LED – OFF
(800) 523-9466
For additional assistance call the Lutron Hotline:
RadioRA is a trademark of Lutron Electronics Co. Inc.
This product may be covered by one or more of the following
U.S. patents: 5,248,919; 5,399,940; 5,736,965; 5,798,581;
5,838,226; 5,848,054; 5,905,442, 5,982,103
Assignment Mode
Up
TX
RX
Down
Select
Level Set Mode
By default, all Dimmers, Switches, or GRAFIK
Eye Control Units are assigned to the ALL ON
(Phantom Button 16) and ALL OFF (Phantom
Button 17) scenes. Turn the Dimmers,
Switches, or GRAFIK Eye Control Units OFF to
unassign them while programming the ALL ON
or ALL OFF scenes.
Control
®
Assignment Mode
Power
Power
Advertisement
Table of Contents
