Table of Contents
Advertisement
Advanced Programming
Step 3
Erase Phantom Button
programming
Simultaneously press and hold the Select and
Assign buttons until the Assign LED begins to
flutter and the display stops flashing
(approximately 3 seconds).
and o erating instructions.
Level Set LED – OFF
(800) 523-9466
For additional assistance call the Lutron Hotline:
RadioRA is a trademark of Lutron Electronics Co. Inc.
This product may be covered by one or more of the following
U.S. patents: 5,248,919; 5,399,940; 5,736,965; 5,798,581;
5,838,226; 5,848,054; 5,905,442, 5,982,103
Up
TX
RX
Down
Select
Level Set Mode
While the Assign LED is fluttering, press the
Level Set button. Note: The Assign LED will
only flutter for 3 seconds.
and o erating instructions.
Level Set LED – OFF
For additional assistance call the Lutron Hotline:
RadioRA is a trademark of Lutron Electronics Co. Inc.
This product may be covered by one or more of the following
U.S. patents: 5,248,919; 5,399,940; 5,736,965; 5,798,581;
5,838,226; 5,848,054; 5,905,442, 5,982,103
Up
TX
RX
Down
Select
The Assign LED will stop fluttering
and will turn ON. The display will
begin to flash. All Dimmers and/or
Switches will turn OFF. Programming
is now erased from that RS232
Interface Phantom Button.
• Repeat Steps 2 and 3 for all RS232
Interface Phantom Buttons with
programming that you want to erase.
Assignment Mode
Power
(800) 523-9466
Assignment Mode
Level Set Mode
Power
RadioRA
Step 4
Complete erasing Phantom
Button programming
Press and hold the Assign button until the
display stops flashing and the Assign LED
turns OFF (approximately 3 seconds).
and o erating instructions.
Level Set LED – OFF
For additional assistance call the Lutron Hotline:
RadioRA is a trademark of Lutron Electronics Co. Inc.
This product may be covered by one or more of the following
U.S. patents: 5,248,919; 5,399,940; 5,736,965; 5,798,581;
5,838,226; 5,848,054; 5,905,442, 5,982,103
Up
TX
RX
Down
Select
Display will be ON and the Assign LED will be
OFF.
Setup Guide Addendum for the RS232 Interface
®
(800) 523-9466
Assignment Mode
Level Set Mode
Power
41
Advertisement
Table of Contents
