Locations Of The Transport Locks On The Machine; Transport Lock For Work Area Door And Operating Terminal - Index G300.2 Operating Instructions Manual

TRANSPORT

locations of the transport locks on the machine

32
Locations of the transport locks on the machine

Transport lock for work area door and operating terminal

For transporting the machine, the work area door (1) was opened (Fig.: a) and
secured (Y).
The operating terminal (2) was partially detached and swiveled into the work area
position.
The operating terminal was secured by means of the transport locks (X). (Fig.: a)
• Release and remove the transport lock of the work area door (Y) from the guide
bar and the sheet metal cover of the work area door.
Always stabilize the operating terminal (2) when swiveling it
out and removing the transport locks (X) (danger of tipping
over).
• Removing the transport lock (X)
• Swing the operating terminal back to the position outside the work area and
screw it to the sliding console.
Fig.: a
2
DIE235ZZ_20.tif
2
X
Transport, Installation, Commissioning
G300.2 G320.2 (turning length 1400 mm) zero series
1
Y
DIE235EN - 2022-12-05