When Transporting With Air Cushions; Procedure; Locations Of The Air-Cushion Modules - Index G300.2 Operating Instructions Manual

TRANSPORT
lifting and lowering the machine with hydraulic jacks
30

........ when transporting with air cushions

After selecting the appropriate air-cushion modules for this machine, the following
procedure must be followed.

Procedure:

1. Lift the machine using hydraulic jacks.
(Proceed as described in Section "... when transporting with rollers")
Z
1
Fig.: 1
•
Y
DIE235ZZ_10.tif
X
1
Fig.: 1
Locations of the air-cushion modules under the machine
2. Place air cushion modules (Y) under the machine (see Fig.: 1).
Always position air cushion modules at points (X 1/2 ) only under the respective
reinforcements/ribs (•). Do not allow air cushion modules to protrude beyond the
contour – at most flush with the machine bed.
Also, be sure to maintain the positions (X and Z) from the outer edge of the
machine.

Locations of the air-cushion modules

G300.2/G320.2
Operator side
Y
Control cabinet side
X X
1 2
650 670
Z
Y
•
Y
X
Z Z
1
920 930
Transport, Installation, Commissioning
G300.2 G320.2 (turning length 1400 mm) zero series
DIE235EN - 2022-12-05
2
2
2