Table of Contents
Advertisement
SAfETy INSTRUCTIONS
Information on transport, installation, commissioning
8
Safety instructions
Safety instructions and technical specifications
The INDEX user documentation, in particular, the document "Safety
Precautions and Technical Details" must be observed.
The document is part of the INDEX user documentation.
The safety instructions described in this document relate exclusively
to the transport, installation, and commissioning of the machine.
Information on transport, installation, commissioning
Use only suitable hydraulic jacks or a crane to lift the machine.
When transporting with transport or armored rollers, ensure
that the rollers used have the appropriate load-bearing capacity.
Plastic plates or Teflon plates are used to reduce rolling resis-
tance and to bridge unevenness and cracks.
If air cushions are used when transporting the machine to the instal-
lation site, be sure to observe the relevant manufacturer's documen-
tation of the air cushion manufacturer.
When selecting the modules,
• the condition of the floor
• and the suitable size (load capacity), lifting height, and num-
ber of modules must be taken
into account.
If the floor is cracked or slightly porous, the manufacturer states that
a foil should be laid out on the travel path.
INDEX uses the model 4K27NHDL from AeroGO
Transport locks can be identified by their red color.
All transport devices and transport locks (painted red) that are
described in this documentation are part of the machine equip-
ment and remain on the machine or with the customer.
They must not be sent back to INDEX.
Remove all transport locks prior to commissioning.
Store the removed transport locks in a safe place, so they are avail-
able for another transport in the future.
Transport, Installation, Commissioning
G300.2 G320.2 (turning length 1400 mm) zero series
DIE235EN - 2022-12-05
Advertisement
Table of Contents
