Delivery; Machine - Index G300.2 Operating Instructions Manual

Hide thumbs Also See for G300.2:

Table of Contents

TRANSPORT

Delivery

The machine is delivered by truck.

The machine is in the following condition when delivered:

– The hydraulic fluid and lubricating oil tanks will be filled.

(The filler neck of the hydraulic fluid tank will be closed.

Refit the filling and breathing filter before commissioning.)

DIE009ZZ_23.tif

Fig.: Blanking plug

Example:

Filling and breathing filter

by ARGO-HYTOS GmbH

– The cooling lubricant tank will be empty. (The machine has a chip conveyor

with an integrated cooling lubricant tank or a separate cooling lubricant cleaning

system. The chip conveyor and cooling lubricant cleaning system are separate

units.)

– Certain moving parts on the machine, such as sliding guards and the swiveling

operating terminal, are secured by transport locks or were removed.

– Protruding machine parts hampering the transport may have been removed.

– All blank parts of the machine were treated by spray-covering with an anti-rust

agent.

DIE140ZZ_44.tif

Transport, Installation, Commissioning

G300.2 G320.2 (turning length 1400 mm) zero series

DIE009ZZ_22.tif

Fig.:

Example of filler neck

DIE235EN - 2022-12-05

Table of Contents

G320.2