General Note - Index G300.2 Operating Instructions Manual

GENERAl NOTE

Maschi n endokumentati o n_beachten.ai
6
General note
All documents and drawings (working documents) required for
the operation of the machine can be found on the supplied data
carrier under Chapter 1, "Instructions" , or Chapter 2, "Diagrams
and drawings").
Documents and drawings of add-on equipment from other manufac-
turers can be found in Chapter 3, "Third-party documentation".
In addition, these data/documents are stored on the controller.*
(* - iXpanel installation required)
Transport, Installation, Commissioning
G300.2 G320.2 (turning length 1400 mm) zero series
DIE235EN - 2022-12-05