INSTAllATION
Installation and leveling of configuration levels and add-on equipment
44
Installation and leveling of configuration levels and
add-on equipment
The bar feeder must always be doweled (in conjunction with a bar feeder, the ma-
chine does not need to be doweled).
Bar feeders have leveling elements that allow them to be aligned flush with the
work spindle with ± 0.1 mm/m accuracy.
The workpiece conveyor belt, pallet station, etc., also have leveling elements that
allow them to be aligned longitudinally and laterally to the main spindle's axis of
rotation with ± 0.1 mm/m accuracy.
(For further information, see the corresponding installation plan in Chapter 2, "Dia-
grams and drawings".)
Transport, Installation, Commissioning
G300.2 G320.2 (turning length 1400 mm) zero series
DIE235EN - 2022-12-05