Table of Contents
Advertisement
TRANSPORT
Unloading and transporting of separate units
Transport, Installation, Commissioning
G300.2 G320.2 (turning length 1400 mm) zero series
DIE235EN - 2022-12-05
Unloading and transporting of separate units
Equipment levels or add-on equipment such as chip conveyors, bar feeders, bar
loading magazines, etc., are separate units.
They have dedicated transport regulations that must be observed for unloading and
transporting.
(Chapter 1, "Instructions" - Chapter 3, "Third-party documentation")
Do not step under suspended loads.
Smaller separate units are either on a pallet or packed with another unit and do not
have their own transport regulations.
Follow the manufacturer's documentation!
Documents and drawings of add-on equipment from other manufac-
turers can be found in Chapter 3, "Third-party documentation".
Use suitable transport ropes or straps for unloading and transporting.
Attach the transport ropes or straps, making sure they cannot slip, and the load is
securely suspended.
Attach the ropes or straps to any eyebolts that are provided for transport.
Unpack the accessories and check them for
completeness
After unloading, unpack the machine accessories and check them against the in-
formation on the delivery form for completeness (compare with the bill of lading or
delivery form).
In case of discrepancies, contact INDEX or your INDEX representative.
37
Advertisement
Table of Contents
