General Hazards During On-Site Transport; Dimensions And Masses; Transporting And Lifting Aids - Index G300.2 Operating Instructions Manual

SAfETy INSTRUCTIONS
Information on transport, installation, commissioning
10

General hazards during on-site transport

Danger to life!
Do not step under suspended loads.
Machines must be transported by authorized and qualified personnel only.
Act responsibly when transporting the system and always consider the conse-
quences. Avoid dangerous and risky actions.
Slopes and gradients (driveways, ramps, etc.) are particularly dangerous. Use extra
care if such passageways cannot be avoided.
Ensure secure and proper seating of the load. If necessary, use additional fixtures
to ensure that the cargo is not able to slip.
The transport vehicles must be able to produce sufficient traction and braking forc-
es for safe transport.

Dimensions and masses

The machine and control cabinet masses are indicated on the respective machine
installation plan in Chapter 2, "Diagrams and drawings".
The masses of optional separate units, such as chip conveyor, bar feeder, bar
loading magazine and similar devices, can be found either in the specific transport
instructions/manufacturer documentation for these equipment levels or accesso-
ries, or in the corresponding machine installation plan in Chapter 2, "Diagrams and
drawings".

Transporting and lifting aids

For lifting and transporting the individual units, only lifting and transporting aids
having sufficient capacity and loading platform must be used.
Transport, Installation, Commissioning
G300.2 G320.2 (turning length 1400 mm) zero series
DIE235EN - 2022-12-05