Table of Contents
Advertisement
INSTAllATION
Electrical connection
38
Installation
Electrical connection
Important notes
Caution! Danger to Life!
All work on the electrical equipment must be carried out exclu-
sively by properly trained qualified personnel.
The control voltages are connected on one side with PE
according to EN 60204-1. See the information on the wiring
diagram.
The control cabinet may be opened only when the main
switch is switched off. While the main switch is switched on,
the control cabinet must be secured according to valid safety
standards.
See the order confirmation for the precise electrical requirements.
The electrical documentation supplied is definitive and binding. They
must be available to INDEX's customer service at any time.
The machine must be connected to the electrical supply network via
the main switch (multi-wire cable). The connection must be made
with a clockwise rotating field.
The electrical connection is indicated in the wiring diagrams.
The machine is prepared for connection to three-phase power lines
(TN-S network).
Before connecting the machine, check that the existing power
Es müssen die jeweils geltenden Richtlinien und Vorschriften des
01
settings and network form of the respective power supply company
Verwendungslandes berücksichtigt werden.
de
match the ratings defined for the machine.
If this is not the case, an upstream transformer is required.
The guidelines and regulations applicable in the country of use must
02
be followed.
en
Les différentes directives et prescriptions en vigueur dans le pays
03
d'utilisation devront être prises en compte.
fr
Devono essere rispettate di volta in volta le direttive e le prescrizioni
04
vigenti nel paese di utilizzo.
it
De gällande riktlinjerna och föreskrifterna i användningslandet måste
05
följas.
sv
Deben cumplirse las prescripciones y las directivas vigentes en el
06
país de utilización.
es
Têm que ser consideradas as diretrizes e prescrições aplicáveis do
Transport, Installation, Commissioning
G300.2 G320.2 (turning length 1400 mm) zero series
DIE235EN - 2022-12-05
Advertisement
Table of Contents
