Table of Contents
Advertisement
INSTAllATION
leveling the machine
Transport, Installation, Commissioning
G300.2 G320.2 (turning length 1400 mm) zero series
DIE235EN - 2022-12-05
Leveling the machine
(Accuracy 0.1 mm/m – also check by inverting the level)
Leveling in the Z and Y directions
To level the machine, place precision spirit levels at certain points. (see Fig.: 1-2)
Turn back machine feet D and E as far as necessary so that they do
not influence the alignment of the machine.
See Section "Installing the Machine", Fig.: "Leveling the entire machine".
Leveling in the Z direction
– Place the precision spirit level on the guide bar Z1 (Fig.: 1)
– Now level the machine in the Z direction using machine feet B and C.
DIE140ZZ_36.tif
Fig.: Example precision spirit level 0.10 mm/m (Roeckle)
Fig.: 1
DIE140ZZ_51.tif
41
Advertisement
Table of Contents
