Chapter 4
Configuring the VoIP Gateway using the INI file
You can configure the VoIP Gateway using the web interface or by loading the configuration .INI
file. The configuration INI file is downloaded using the web interface.
To create an INI file, Nortel Networks recommends that you:
1
Upload the INI file from the VoIP Gateway.
2
Make the necessary changes.
3
Download the resulting file to the VoIP Gateway.
This method preserves the programming that already exists, including the special default values
that have been entered when the unit was manufactured.
Retrieving the INI file from the VoIP Gateway
Before you can edit the INI file, you need to get the INI file from the VoIP Gateway.
1
Access the web interface.
2
Click the Advanced Configuration button.
3
Click the Configuration File tab.
The Configuration File screen appears
Figure 19 Configuration File screen
4
Click the Get INI FILE button.
5
Navigate to the folder where you want to save the INI.
6
Click the Save button.
The VoIP Gateway starts loading INI file into the folder you selected.
A message appears when the file transfer is completed.
Norstar VoIP Gateway Configuration Guide
85