Install the Access Point Using KT-147407-02 Bracket
Parts and KT-150173-01 Extension Arm
Install the Access Point Using KT-147407-02 Bracket Parts and KT-150173-01
Extension Arm
Before You Begin
The hardware required for installation:
•
Flat part of the KT-147407-02 bracket
•
1-axis tilt part of the KT-147407-02 bracket
•
KT-150173-01 extension arm
•
One access point
About This Task
Figure 6: KT-150173-01 Extension Arm
The KT-150173-01 extension arm is used in combination with the wall and pole bracket parts of the
KT-147407-02 bracket.
Procedure
1. Attach the flat part of the KT-147407-02 bracket to the access point using two M6 screws.
2. Place the flat part of the KT-147407-02 bracket inside the 1-axis tilt bracket, and attach the 1-axis tilt
bracket to the flat bracket using four M6 screws.
24
ExtremeWireless™ 802.11ax Wi-Fi 6E Outdoor AP5050D Access Point
Install the Access Point