Attach The Access Point To A Pole Using All Three Kt-147407-02 Bracket Parts - Extreme Networks ExtremeWireless AP460i Installation Manual

Attach the Access Point to a Pole Using All Three
KT-147407-02 Bracket Parts
Figure 11: KT-147407-02 pole part
Note
The pole install options are applicable to both internal and external antenna model outdoor
access points.

Attach the Access Point to a Pole Using All Three KT-147407-02 Bracket Parts

Before You Begin
The following hardware is required to mount the access point on to a pole:
•
KT-147407-02 flat part
•
KT-147407-02 1-axis tilt part
28 ExtremeWireless™ AP460i/e Access Points
Install the Access Point