Extremecloud Iq Controller Status Led Activity; Ap5050D Purchase Order Information; Ap5050D Order Information; Kt-147407-02 Bracket Order Information - Extreme Networks ExtremeWireless AP5050D Installation Manual

802.11ax wi-fi 6e outdoor access point
Table of Contents

Advertisement

AP5050D Overview
Slow-blinking white: The device has a CAPWAP connection to ExtremeCloud IQ, but is operating on
802.3at power instead of 802.3bt power.
Solid amber: The device power is on and the access point is in boot up mode, or is running without a
CAPWAP connection.
Slow-blinking amber: The device has no CAPWAP connection to ExtremeCloud IQ, and is operating
on 802.3at power instead of 802.3bt power.
Fast-blinking amber: The device is updating its IQ Engine firmware.

ExtremeCloud IQ Controller Status LED Activity

The following list shows the ExtremeWireless WiNG status:
Dark: The LED power is off or the LED has been de-activated.
Solid white: The device is booting or already taken over by the controller.
Slow-blinking white: The device is in the process of being taken over by the controller or has failed to
be taken over by the controller.
Flashing fading white: Configuration pushes down to access point from controller helping an user to
locate the access point location using visual inspection.
Solid amber: The access point is upgrading its firmware.
Fast-blinking amber: The access point is acquiring DHCP IP.

AP5050D Purchase Order Information

Use this information to order your access point and accessories.

AP5050D Order Information

The AP5050D access point is sold by itself, and you must order the mounting brackets and accessories
separately for wall, or pole installations.
The ordering details are described in the following table.
Table 8: AP5050D Part Number
Part number
Description
AP5050D-WW
Outdoor tri-radio WiFi 6E access point (4x4:4), 2.4 GHz, 5GHz, 6GHz, and multirate port,
internal directional antennas.
Domain: World SKU

KT-147407-02 Bracket Order Information

You can install the access point to a wall using the KT-147407-02 bracket parts (+/-15 degree, 1-axis) or
the MBO-ART02 (20 degree increments +/-80 degrees, 10 inch extension).
You can install the access point to a pole using:
KT-147407-02 bracket parts (+/-15 degree, 1-axis), or
ExtremeWireless™ 802.11ax Wi-Fi 6E Outdoor AP5050D Access Point
ExtremeCloud IQ Controller Status LED Activity
13

Advertisement

Table of Contents
loading

Table of Contents