Connecting; Connecting The Power Supply Cable - Siemens SICHARGE UC 150 Operating Instructions Manual

Connecting

7.1

Connecting the power supply cable

To connect the charging station to the distribution network, connect the power cable to the
main switch of the charging station.
NOTE
Connection of UC300, UC450, UC600
You connect the parent charging station and child charging station identically. The following
description also applies to the other control cabinets.
Requirements
• You have removed the bottom protective cover.
• You have inserted the power cable into the cabinet.
• Cable cross-sections from 50 mm
SICHARGE UC 150
Operating Instructions, 02/2023, A5E50068475-AB
2
to a maximum of 300 mm
7
2
can be connected.
77