Hmi Functions - Siemens SICHARGE UC 150 Operating Instructions Manual

Manual termination
1. Switch to the detail view of your charging process (Page 113)on the HMI.
2. Press the "Stop charging" button.
On the HMI you are prompted whether you really want to end the charging process.
Figure 9-1 Confirming termination of the charging process
3. Confirm the dialog with the "Stop charging" button.
To cancel termination of the charging process and resume the charging process, press
"No".
Result
After successful charging, you can retrieve summarized information on your charging process
in the "Settings menu (Page 122) > Last charging report (Page 123)". This information
depends on the selected charging port and the available tariff information.
Remove the charging cable from the vehicle.
9.3.3

HMI functions

The user interface on the parent charging station guides you through the charging process.
You can change the language of the user interface and make other settings.
SICHARGE UC 150
Operating Instructions, 02/2023, A5E50068475-AB
Operation
9.3 Operation via HMI
115