Access Point Bracket Usage And Mounting Options - Extreme Networks ExtremeWireless AP560i Installation Manual

Access Point Bracket Usage and Mounting Options

Access Point Bracket Usage and Mounting Options
The AP560i access point can be mounted under a seat, on a wall, or to a pole, which are described in
the following table.
Table 8: AP560i mounting bracket usage
Mounting bracket
and part number
EIO-04 under-seat
housing; also used
with WS-EIO-02
(#30524) silicone
rubber kit
KT-147407-02
bracket; comes
with three bracket
parts
KT-150173-01;
extension arm;
used with
KT-147407-02
bracket parts
16 ExtremeWireless™ AP560i Access Point
Wall install Pole install
No No
Yes Yes
Yes; place the Yes; attach the
KT-150173-01 KT-147407-02 pole
extension arm on part to the
top of the 1-axis extension arm
KT-147407-02 tilt
part
Install the Access Point
Under-seat install Notes
Yes The access point
can be installed
under a seat on a
slope or a flat
surface such as
stadium floor.
The WS-EIO-02
silicone rubber kit
is used when the
access point is
installed on a
stadium riser.
No For attaching to a
wall or a flat
surface, use the
bracket part that
has two holes
metal surface. For
attaching to a pole,
attach the
KT-147407-02 pole
part on top of the
1-axis tilt part.
No None.