Typical Application - Smartgen HGM410DC User Manual

11 TYPICAL APPLICATION

Note: Aux. Input 3 can be set as temperature sensor or oil pressure sensor; Aux. Input 4 can be
set as temperature sensor, oil pressure sensor or level sensor.
CAUTION! Expand relay with high capacity in start and fuel output is recommend.
CAUTION! Expand relay must be used in gen closed outputs.
Note: Let its normally closed contact series connect between fuel relay output port and
electromagnetic valve when you connect emergency stop button on the controller. Emergency stop
alarm can be displayed if you configure one input port as "Emergency Shutdown" (one end connect to
normally open contact, the other end connect to ground).
HGM410DC Genset Controller
HGM410DC Typical Wiring Diagram
Single-phase 2-wire
2-phase 3-wire
2015-11-12
HGM410DC Genset Controller User Manual
Version 1.0 Page 31 of 34