Smartgen HGM410DC User Manual page 4

Genset controller
Table of Contents

Advertisement

Battery Voltage (VB)
Charger Voltage (VD)
Hours Counter (HC): Max. 999999 hours
Start times: Max.999999 times
——Control & Protection: automatic start/stop of the genset, ATS(Auto Transfer Switch) control
with perfect fault indication and protection function;
——Storage battery under voltage start: start when battery is under voltage, stop when voltage is
normal;
——Genset self-check function: automatic start when the genset hasn't been running for a long
time and automatic stop when the genset has been running for a while;
——With ETS(Energize To Stop), idle control, pre-heat control, speed raise control and speed drop
control function; All output ports are relay-out;
——Parameter setting: parameters can be modified and cannot be lost even in case of power
outage; all the controller parameters can be adjusted using front panel of the controller or via
PC using an SG72 adaptor.
——Multiplex input port 3 and 4 can be used in various fields: input 3 can be used as auxiliary input
port or level sensor while input 4 can be used as auxiliary input port or configurable sensor.
——More kinds of curves of temperature, oil pressure, fuel level can be used directly and users can
define the sensor curves by themselves;
——Configurable sensor: can be set as temperature sensor, oil pressure sensor or fuel level
sensor, enable the detection of double temperature, double oil-pressure and double fuel level.
——Multiple crank disconnect conditions (magnetic pickup, oil pressure, generator frequency) are
optional;
——Widely Power supply range: DC(8~35)V, suitable to different start battery voltage environment.
——All parameters used digital adjustment, instead of conventional analog modulation with normal
potentiometer, more reliability and stability;
——Modular design, self-extinguished ABS plastic enclosure, pluggable connection terminals and
embedded installation way; compact structure with easy mounting.
HGM410DC Genset Controller
V (unit)
V (unit)
2015-11-12
HGM410DC Genset Controller User Manual
Version 1.0
Page 5 of 34

Advertisement

Table of Contents
loading

Table of Contents