Menu Layout And Navigation - AUMA SAEx 07.2-UW Operation Instructions Manual

SAEx 07.2-UW SAEx 16.2-UW / SAREx 07.2-UW
ACExC 01.2 Non-Intrusive Profibus DP
Backlight
7.3.1.

Menu layout and navigation

Groups
ID
Group selection
Table 20: Important push button functions for menu navigation
Push buttons Navigation sup-
port on display
Up ▲
[1]
Down ▼
[2]
Ok
[3]
Save
Edit
Details
[4] C Setup
Esc
The display is illuminated in white during normal operation. It is illuminated in
red in case of a fault.
The screen illumination is brighter when operating a push button. If no push
button is operated for 60 seconds, the display will become dim again.
The indications on the display are divided into 3 groups:
Figure 47: Groups
[1] Start menu
[2] Status menu
[3] Main menu
Status menu and main menu are marked with an ID.
Figure 48: Marking with ID
S ID starts with = status menu
S
M ID starts with = main menu
M
It is possible to select between status menu S and main menu M:
For this, set selector switch to 0 (OFF), hold down push button C for approx. 2
seconds until a screen containing the ID M... appears.
Figure 49: Select menu groups
You return to the status menu if:
SAREx 16.2-UW Control unit: electronic (MWG)
Functions
Change screen/selection
Change values
Enter figures from 0 to 9
Change screen/selection
Change values
Enter figures from 0 to 9
Confirm selection
Save
Enter <Edit> menu
Display more details
Enter Main menu
Cancel process
Return to previous display
Operation
45