Analogue Signals (Analogue Outputs) - AUMA SAEx 07.2-UW Operation Instructions Manual

SAEx 07.2-UW SAEx 16.2-UW / SAREx 07.2-UW
ACExC 01.2 Non-Intrusive Profibus DP
9.3.

Analogue signals (analogue outputs)

Requirements
Valve position
Torque feedback
Analogue signals are only available if additional input signals are provided.
Signal: E2 = 0/4 20 mA (galvanically isolated)
Designation in the wiring diagram: AOUT1 (position)
Signal: E6 = 0/4 20 mA (galvanically isolated)
Designation in the wiring diagram: AOUT2 (torque)
For further information on this topic, please refer to Manual (Operation and setting).
SAREx 16.2-UW Control unit: electronic (MWG)
Signals (output signals)
57