Transport - Beckhoff AL8000 Operating Instructions Manual

Transport and storage

Transport

6.2
Linear servomotors
6.2.1
64 ───
WARNING
Do not move under suspended loads
Use suitable means of transport. Secure coil parts and magnetic
plates against falling.
Falling coil parts and magnetic plates can lead to serious or fatal
accidents.
Do not touch connection points and plug contacts
Ensure a protected working environment. Avoid contact with ESD
sensitive components without ESD protective clothing.
Electrostatic discharge can damage the circuitry in the coils and
electrical components such as thermal contacts.
Legal regulations for the lifting of loads
When transporting individual coil parts or magnetic plates without
lifting gear, comply with the legal regulations for lifting loads for em-
ployees.
The following options are available for transporting a single coil
part:
Up to series AL804x
• without aids, by hand in compliance with the legal requirements
for the lifting of loads, or
From series AL806x
From series AL806x, we recommend hoists for lifting and transport-
ing the coil parts. A coil part of the AL806x series can be transported
horizontally or vertically:
• By means of a suitable hook or eyebolt in the thread on the top
of the coil part, with transport belt and sufficiently dimensioned
lifting gear
We recommend that the coil part is always lifted horizontally. Only
lift and transport in a vertical position if absolutely necessary.
Please refer to sections "AL806x horizontal and AL806x vertical",
[Page 65]
AL8000 Version: 1.7