Table of Contents
Advertisement
Conditions
6.1
Version: 1.7
Avoid damage to the coil parts and resulting loss of warranty
Observe the conditions and the following chapters on transport and
storage.
Failure to observe the conditions may result in damage to the coil
parts and void the warranty.
Do not remove silver protective cover
Do not remove the silver protective cover on the magnetic plates.
The protective cover protects against mechanical damage, mag-
netism and environmental influences. If you remove the protective
cover, the magnetic plate may be damaged.
During transport and storage avoid damage to the coil parts, mag-
netic plates and individual components. Observe the specifications
in the following chapters and comply with the following conditions:
• Climate category: 3K3 according to EN 60721
• Temperature: -25 °C to +70 °C, maximum fluctuation 20 K/hour
• Humidity: relative humidity 5% to 95%, no condensation
• Use of suitable means of transport
• Transport and storage only in horizontal and vertical position
• Use of the vendor's original packaging
The table shows the maximum stacking height at which you may
store and transport the coil parts on a pallet in the original packag-
ing:
Motor type
AL802x
AL804x
AL806x
AL8000
Transport and storage
Stacking height [pieces]
6
5
1
───
63
Advertisement
Table of Contents
