For your safety
After operation
2.2.3
16
───
Avoid overheating
Activate and monitor the temperature contact of the motor. Provide
for sufficient cooling. Switch off the motor immediately if the temper-
ature is too high.
Do not touch any moving or rotating components
Do not touch any moving or rotating components. Fasten all parts or
components on the machine or plant.
De-energize and switch off components before working on
them
Check the functionality of all safety-relevant devices. Secure the
working environment. Secure the machine or plant against being in-
advertently started up. Observe the chapter: "Decommissioning".
AL8000
Version: 1.7