Table of Contents
Advertisement
Mechanical installation
Other magnetic plates
90
───
► Insert screws [5] into the magnetic plate on the machine bed
► Tighten the screws crosswise and from inside to outside
Observe tightening torque:
Quality of the screws = strength class 8.8
Bolt
Tightening torque [Nm]
► Remove the protective cover [6] on the mounted magnetic plates
onto which the machine slide is to be pushed. Do not dispose of
the protective cover and keep it for subsequent transport of the
machine or system.
► Slide the machine slide [1] onto the mounted magnetic plates [2]
► Secure the machine slide mechanically against uncontrolled
movements
► Mount the other magnetic plates in the same way
Once all components have been fitted and you start up the ma-
chine or system:
► Remove all protective covers [3] on all magnetic plates
AL8000
M5
6
Version: 1.7
Advertisement
Table of Contents
