Verification - Beckhoff AL8000 Operating Instructions Manual

Mechanical installation

Verification

9.3
Smooth operation
9.3.1
96 ───
After assembly, check the installed components for smooth running
and adequate "air gap", [Page 70].
Smooth running of the machine slide
The machine slide should move smoothly along the entire magnetic
track. A permanent air gap must exist between the coil part and the
magnetic track.
If you cannot move the coil part smoothly, check the assembly of
your application. Observe all specifications from Chapter "Mechani-
cal installation", [Page 84]
To check the smooth running of the machine slide, carry out the fol-
lowing steps:
► Remove all tools from the machine or system
► Clean the magnetic track
► Move the machine slide carefully by hand and guide it along the
entire length of the magnetic track
AL8000 Version: 1.7