Table of Contents
Advertisement
Version: 1.7
Use opaque cooling hoses
Use opaque cooling hoses to connect the water cooling and add
suitable chemical additives.
Failure to observe this may result in algae formation inside the
cooling hoses. Algae formation can shorten the life of the cooling
hoses and negatively affect the performance of the linear motor.
For connecting the push-in fittings, we recommend the following
cooling hose sizes:
Coil part
AL804x
AL806x-1xxx
► Insert the cooling hoses [3] into the threaded push-in fittings
AL804x:
► Connect cooling hoses at the opposite side of the coil part
AL8000
Mechanical installation
Hose
Inner diameter
Outside diameter
[mm]
4
6
6
8
───
95
Advertisement
Table of Contents
