Table of Contents
Advertisement
Mounting
Version: 1.7
► Clean the mounting surface on the machine bed and the mag-
netic plate
► Push the machine slide [1] to one end of the machine bed [2]
WARNING
Secure the machine slide sufficiently
Secure the machine slide mechanically against uncontrolled
movements. Do not reach under the machine slide or hold the
machine slide by hand.
If the strong magnetic field of the permanent magnets in the mag-
netic plate unexpectedly attracts the components magnetically
during assembly, it is not possible to hold the machine slide by
hand. Severe injuries to limbs can be the result.
► Mechanically secure the machine slide against the attractive
forces and uncontrolled movements of the magnetic plate
► Insert locating pins [3] into the machine bed
► Pay attention to the insertion depth of the locating pins [3]
Locating pins
Tolerance zone
Maximum immersion in the mag-
netic plate
► Check the alignment of the magnetic plate. Make sure that the
Beckhoff logos are on the same side.
► Place the magnetic plate [4] on the locating pins [3]
AL8000
Mechanical installation
AL852x
AL854x
AL856x
M6
3.2 mm
5.5 mm
───
89
Advertisement
Table of Contents
