Table of Contents
Advertisement
Mechanical installation
Mounting
9.2.3.3
94
───
Sealing the motor correctly
Seal the cooling connections using suitable screw connections. Do
not use cone sealing couplings or sealants in the thread, such as
liquid sealants or Teflon tape. Observe the permissible thread
depth and the maximum tightening torque in aluminum.
Non-compliance can lead to damage to the motor and to the com-
plete system.
For the connection of the cooling hoses we recommend push-in fit-
tings with male thread:
Coil part
AL804x
AL806x-1xxx
► Remove the plug [1] at the front on the coil part
AL804x:
► Remove the plug on the opposite side of the coil part
► Screw the threaded push-in fittings [2] into the holes provided
AL804x:
► Screw in the threaded push-in fittings on the opposite side of the
coil part
AL8000
Male thread
M5
G 1/8 "
Version: 1.7
Advertisement
Table of Contents
