Fig. 45: Web - Frequency Management Screen - Redline RDL-3000 User Manual

RDL-3000
Add
Enter the start and end frequency for this range. The subscriber automatically
compensates for channel size when selecting center frequencies.
Begin: Lower limit of the frequency range to scan.
End: Upper limit of the frequency range to scan.
Add: Click to save the displayed range settings (Local Frequency Range table). The
range entered is not checked for validity until the Apply button is clicked.
Delete
Index: Choose the index of the frequency range to be deleted.
Delete: Click to permanently remove the selected frequency range.
Local Frequency Ranges
The entries in this table are saved in non-volatile memory and are loaded when the
unit is power-cycled/rebooted.
Index: Index of this entry in the Local Frequency Range table.
Begin: Lower limit of the frequency scan interval (MHz).
End: Upper limit of the frequency scan interval (MHz).
Controls
Apply: Check the current frequency range settings in the Local Frequency Range
list. Invalid entries (e.g., out of range) are deleted. Valid settings are activated in the
runtime configuration.
Apply and Save All: Check the current frequency range settings in the Local
Frequency Range list. Invalid entries (e.g., out of range) are deleted. Valid settings
are activated in the runtime configuration and saved permanently.
User Manual

Fig. 45: Web - Frequency Management Screen